Watching Tv; Preparation; Turning On The Power; Turning Off The Power - Sharp LC-32SH10U Operation Manual

Watching TV

Simple operations for watching a TV program
POWER indicator
TV status indicator (POWER)
ON
OFF/Standby
POWER (On/Standby)
14
POWER
Lighting (Green)
Lighting (Red)

Preparation

Perform the following steps before you press POWER
on the remote control unit.
1. Insert the batteries into the remote control unit.
(See page 8.)
2. Connect the antenna cable to the TV. (See page
13.)
3. Plug in the AC cord to the AC outlet. (See page 7.)

Turning on the power

Press POWER on the TV, or POWER on the remote
control.
• POWER indicator (Green): The TV is on. ("PLEASE
WAIT" will appear for a few seconds on the screen.)
NOTE
• The LANGUAGE setup menu will appear automatically
when MENU is pressed on for the fi rst time. (See below.)

Turning off the power

Press POWER on the TV, or POWER on the remote
control.
• The TV enters standby mode and the image on the
screen disappears.
• The POWER indicator on the TV changes to Red.
NOTE
• If you are not going to use this TV for a long period of
time, be sure to remove the AC cord from the power
outlet.
• Weak electric power is still consumed even when
POWER is turned off.
• If a station being viewed stops broadcasting, the TV will
automatically shut itself off after 15 minutes.

Initial setup

Language setting
When you press MENU for the fi rst time, the
LANGUAGE setup menu will appear
automatically.
Select from among 3 languages: English, French and
Spanish.
Press / to select the desired language
1
from the list.
SETUP
LANGUAGE
CLOCK SET
AIR/CABLE
AUTO CH MEMORY
ADD/DELETE
:SELECT
ENGLISH
ENGLISH/FRANÇAIS/ESPAÑOL
CABLE
:ADJUST