Automatically Selecting The Input Signal Function - Eizo FlexScan L 665 L665 L665 User Manual

EIZO Logo disappearing function
When switching on the power button on the front panel, the EIZO logo is displyed for a
while. If you desire to display or undisplay this logo, use this function. (Default is logo
appearing.)
• To undisplay
Switch off the monitor's power by the power switch, then hold down the Enter
button once again and turn the power back on.
• To display
Switch off the monitor's power by the power switch, then hold down the Enter
button once again and turn the power back on.

Automatically selecting the input signal function

The monitor will automatically detect the inputted signal of either the connection for
display.
Connecting two PCs to the monitor
When the one computer is switched off or entering the power saving mode, the monitor
will automatically dislay the other signal.
Use the ScreenManager to switch the input selection to manual.
[Procedure]
(1) Select <Input Signal> in the <Others> menu.
(2) Select <Manual>.
English
3. ScreenManager
19