Eizo eClient 620L User Manual
  1. Manuals
  2. Brands
  3. Eizo Manuals
  4. Monitor
  5. eClient 620L
  6. User manual
Eizo eClient 620L User Manual

Eizo eClient 620L User Manual

Lcd monitor integratrd windows-based terminal
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Please confirm the version of the software built in eClient, and refer to
the suited User's Manual (Refer to the User's Manual Version List on
next page).
This is the manual for the following software version.
* Microsoft Windows CE: 4.0 Rev. 2.3.2 or later
* Microsoft Terminal Server Client: Ver. 7.2.1 or later
* ICA Client: Ver. 7.23 or later
- For Administrator -
For Microsoft Windows CE.NET
Version E

Advertisement

Table of Contents
loading

Related Manuals for Eizo eClient 620L

Summary of Contents for Eizo eClient 620L

  • Page 1 Please confirm the version of the software built in eClient, and refer to the suited User's Manual (Refer to the User's Manual Version List on next page). This is the manual for the following software version. * Microsoft Windows CE: 4.0 Rev. 2.3.2 or later * Microsoft Terminal Server Client: Ver.
  • Page 2 User’s Manual Version List A handling description changes with versions of the software built in eClient. refer to below. NOTE • The version of software built in eClient can be checked with a [System]-[ICA] tab of [Terminal Properties]. Microsoft Windows CE .NET Software Manual (This Manual)

  • Page 3: Safety Symbols

    Copyright© 2003-2004 EIZO NANAO CORPORATION All rights reserved. No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, or otherwise, without the prior written permission of Eizo Nanao Corporation.

  • Page 4: Table Of Contents

    2. CONNECTING THE eClient 620L ... 9 2-1. Setting up the eClient 620L...9 2-2. Connecting the eClient 620L ...10 3. SETTING UP the eClient 620L ... 11 4. ADDING & CHANGING A CONNECTION NAME ... 19 4-1. Adding a Connection Name...19 4-2.

  • Page 5: Introduction

    Thank you very much for purchasing the EIZO eClient 620L. 1-1. General Description The eClient 620L connects with a Windows Terminal Server*, which installed Microsoft Windows NT Server 4.0 Terminal Server Edition or Windows 2000 Server/Advanced Server/Datacenter Server, and this product is used as a terminal using them.

  • Page 6: Package Contents

    - Microsoft Natural Keyboard Pro (Japanese) - Microsoft Office Keyboard (Japanese) • Please use the enclosed mouse. EIZO NANAO CORPORATION will not be held responsible for accident or damage caused by the use of a mouse manufactured by other companies.

  • Page 7: Controls & Connectors

    Green Yellow (4) Power button NOTE • When turning off/on the unit, leave the unit off for a few seconds before turning it on again. (3)(4) 620L status • Operation • Screen saver mode Power save mode • Suspend mode (Wake on LAN standby) •...
  • Page 8 Rear (5) Power Connector (6) Ethernet Connector (10 Base-T, 100 Base-TX) (7) Headphone Connector (8) Microphone Connector (9) Serial Port (RS-232C) (10) USB Port (Downstream) x 2 (11) Security Lock* (12) Holes for Mounting an Arm Stand* (13) Stand (Detachable) This allows for connection of a security cable.

  • Page 9: Connecting The Eclient 620L

    2. CONNECTING THE eClient 620L This chapter explains how to connect the eClient 620L to a WTS. 2-1. Setting up the eClient 620L NOTE • Before connecting the product, set up the monitor after unfolding the base of the stand.

  • Page 10: Connecting The Eclient 620L

    In case of a dial-up or dial-in connection: Connect the eClient 620L to a modem or a modem card. Plug a keyboard and a mouse into the eClient 620L. (Plug a mouse into the keyboard if the keyboard has a USB port.) If using other devices, please connect them to the appropriate connectors.

  • Page 11: Setting Up The Eclient 620L

    • When no picture is displayed, or when the message (No keyboard connected. / No mouse connected.) is shown on the screen, please refer to “8. Troubleshooting” on page 57. “eClient Setup Wizard” is displayed. (Set up the 620L according to directions of the displayed dialog box.) 3. SETTING UP the eClient 620L...
  • Page 12 End User License Agreement page is displayed. Read the content and click [Accept] to continue. 3. SETTING UP the eClient 620L...
  • Page 13 Click [Network Properties] and set up connection information according to the connection method to WTS/Web server. NOTE • In use of the dial-in connection (ICA protocol only) to log on to WTS, click [Next] to go procedure 5. 3. SETTING UP the eClient 620L...
  • Page 14 (1) Double-click [Built-in LAN] icon [IP Address] ...Type the IP address of the unit. [Name Servers]...Type the IP address of each server when DNS or [Advanced]...Type the transmission speed and MAC Address of a 3. SETTING UP the eClient 620L WINS is used. network.
  • Page 15 Clicking an active button of the small window starts the connection listed in the [Current Connections]. To set an automatically start connection when the 620L boots up, select the [Connect automatically on boot up] check box. 3. SETTING UP the eClient 620L...
  • Page 16 Set up the desktop area. [Desktop Area and Refresh Frequency] ...Set the resolution/refresh rate. (The 620L supports [Desktop Colors]...Set the desktop color (256 Colors / High color) of the NOTE • After WTS connection, the WTS setting may control the desktop color.
  • Page 17 (3) “WTB Printer Wizard” is displayed (Follow the direction of the dialog box.). 1. Select a printer port. (Select “COM 1” for connecting to the serial connector, “LPTx” for the USB port.) 2. Select a model of your printer. 3. Name your printer. 3. SETTING UP the eClient 620L...
  • Page 18 The “Terminal Connection Manager” dialog box will be displayed after restarting. NOTE • Click [No] to finish the “eClient Setup Wizard” and display “Terminal Connection Manager” on the screen. The setting is not activated until the 620L is restarted. 3. SETTING UP the eClient 620L...

  • Page 19: Adding & Changing Aconnection Name

    4. ADDING & CHANGING A CONNECTION NAME This chapter shows how to add, delete, and modify connection names to a WTS. All the settings are managed in the “Terminal Connection Manager”. 4-1. Adding a Connection Name These are settings for the server connection. Each protocol has different settings.
  • Page 20 In Use of RDP Protocol Display [Terminal Connection Manager]. Click the [Configure] tab and [Add...] to set the connection information of the WTS. Protocol selection dialog box is displayed. Select the “Microsoft Remote Desktop Client” (RDP). “WTS Connection Wizard” is displayed. (Setup as following the wizard.) (1) Type the connection name and the name of the Server.
  • Page 21 In Use of the ICA protocol Display [Terminal Connection Manager]. Click the [Configure] tab and [Add...] to set the connection information of the WTS. “New Connection” dialog box is displayed on the screen. Select the “Citrix ICA Client” (ICA). “Specify Connection Type” is displayed. (Setup as following the wizard.) (1) Choose a connection type (Network Connection / Dial-In) for the remote application.

  • Page 22: Setting An Autostart Connection

    • Please repeat the step 2 to 3 when you adding another connection name. 4-2. Setting an Autostart Connection This function configures a connection to start automatically each time the eClient 620L is turned on. (This function is available for a LAN connection.) Select the desired connection name for Autostart Connection and click [Startup...].

  • Page 23: Logon & Logoff

    “Terminal Connection Manager”, click the [Connect] (or simply double click the connection name.) The eClient 620L connects to the WTS and the “Log On to Windows” dialog box is displayed. Type your [User name] and [Password], and click [OK] to log on to the WTS.
  • Page 24 Multi Session You can log on to the WTS with the several connection names, and switch the active sessions. Logon with a Connection Name, as following the previous steps. Press [Ctrl] + [Alt] + [End] keys after logon. “Terminal Connection Manager” is displayed. Select another Connection Name to log on to, and click [Connect].

  • Page 25: Logoff From The Wts

    Logoff from the WTS If your eClient 620L starts its operation with a desktop Logoff from the WTS. (1) Close all applications. (2) Select [Start] on the taskbar. (3) Microsoft Windows NT Server 4.0 Terminal Server Edition: Select [Logoff]. Microsoft Windows 2000 Server / Advanced Server / Datacenter Server: Select [Shut Down...] and select [Logoff] of the [Shut Down Windows] dialog...
  • Page 26 Clicking the button disconnects the dial-up connection. Shut down the eClient 620L. (Please refer to the previous page for shutting down the eClient 620L.) NOTE • It is possible to disconnect from a WTS without closing applications in use (or without logging off).

  • Page 27: Opening/Closing A Local Web Browser

    5-2. Opening/Closing a Local Web Browser Opening a Local Web Browser Please follow the directions relevant on the environment of the eClient 620L. (1) If the web server is on the same network (Intranet): Go to step 2. (2) If the web server is not on the same network, and a dial-up connection is needed (Internet): Click an active button of a small window on the right bottom of the screen.
  • Page 28 NOTE • It is possible to disconnect from a local web server by turn the eClient 620L off. • For the suspend, select [Suspend] in the “eClient Shut down” dialog box, and click [OK]. Press the power button to return the screen.

  • Page 29: Using The Terminal Properties

    6. USING THE TERMINAL PROPERTIES This chapter presents how to modify all settings of the eClient 620L using the “Terminal Properties”. To display the “Terminal Properties” during logging on, press F2 in the “Terminal Connection Manager” dialog box. 6. USING THE TERMINAL PROPERTIES...
  • Page 30 Settings and adjustments of “Terminal Properties” Tab name General Product information, Terminal Name Reset Local Remote computer Resources sound Local devices Display Desktop Area and Refresh Frequency Desktop Colors Screen Saver Contrast / Brightness Experience Connection speed Control Dialing Panel Keyboard Password Mouse...

  • Page 31: General

    6-1. General Product Information [General] tab shows the product name, Product ID, Windows CE Revision, version, and Terminal name. Resetting to Default (1) Select the [Reset the terminal to factory-default property settings] check box. (2) The “System Settings Change” dialog box is displayed, click [Yes]. (3) “Terminal Properties”...

  • Page 32: Local Resources (Rdp Protocol Only)

    6-2. Local Resources (RDP protocol only) Sound settings [Remote computer sound]...Sound settings after WTS connection (Remote Device settings [Local devices] ...Select the applicable device check box when using the 6. USING THE TERMINAL PROPERTIES computer means WTS). device connected from the WTS after WTS connection.

  • Page 33: Display

    6-3. Display Resolutions / Desktop Colors [Desktop Area and Refresh Frequency] ...Set the resolution/refresh rate. (The 620L supports [Colors]...Set the desktop color (256 Colors / High color) of the NOTE • After WTS connection, the WTS setting may control the desktop color.

  • Page 34: Power Save

    Power save [Screen Saver]...Set the screen saver and power save settings. Select the NOTE • Power saving system After the Screen Saver idle period passed, eClient shift to the power save mode. The power consumption is lower than 7 W in the power save mode. •...

  • Page 35: Experience (Rdp Protocol Only)

    6-4. Experience (RDP protocol only) WTS connection [Performance] ...Specify your connection speed to WTS connection. NOTE • This setting can be available only when connecting with WTS, which version is 5.1 or later. [Display the connection bar] ...Display the computer name of the connected WTS as Choose your connection speed from the pull-down menu or select the setting check box.

  • Page 36: Control Panel

    6-5. Control Panel Dialing [Location name]...Choose the sender’s location (click [New] to add a [Local Settings are:]...Setup the local settings. 6. USING THE TERMINAL PROPERTIES new sender’s location).
  • Page 37 Keyboard [Input Locale] ...Selects a keyboard language. [NumLock Key] ...Enables/cancels NumLock function on start-up. [Check Input Devices]...Enables/cancels checking the connection state of a keyboard and a mouse on start-up. When a keyboard and/or mouse are not connected on start-up, the error message is displayed.
  • Page 38 Mouse [Buttons] ...Assigns the primary mouse button and the secondary [Motion] ...Adjusts the speed at which the pointer moves on your Volume & Sounds [Volume] ...Select the check boxes to enable sounds for events, [Sounds] ...Select sounds for each case. 6.
  • Page 39 (on every boot up or every time clicking the [Synchronize] button.) NOTE • Synchronizing time at startup is effective when the 620L is connecting WTS/Web Server using a network connector on the rear. • Getting the NTP Server information from the DHCP Server needs to satisfy the...
  • Page 40 Certificates Lists the certificates stored in the 620L. A certificate can be registered, if an external disk is connected to this product, a certificate file can be imported. NOTE • When using the Secure Gateway, select its certificate and click [Add]. By clicking the button, the certificate can be used.
  • Page 41 Add-on Add-on lists all application software installed in eClient. To remove software, select it and click [Remove]. NOTE • Neither Microsoft Terminal Server Client nor Citrix ICA Client Software is removed. Internet Options [General]...Setup the browser. [Connection] ...Setup the connection method to the browser. [Security]...Setup the security for the connection to the browser.
  • Page 42 Printers NOTE • The eClient 620L supports an LPTx port and a COM1 port. • Use a RDP protocol to set the printer’s adjustment. • If you are using the ICA protocol, please refer to the instruction manual of the Citrix MetaFrame.
  • Page 43 Deleting a printer settings Select the printer icon, and click [Delete]. Modifying the settings Select the printer icon, and click [Properties]. [Printer Properties] dialog box is displayed, change the settings as needed. Network and Dial-up Connections Set up connection information according to the connection method to WTS/Web server (See page 14 for the details).

  • Page 44: Ica Settings (Ica Protocol Only)

    6-6. ICA Settings (ICA Protocol only) NOTE • The settings will affect all the settings with ICA protocol. ICA Client information [ICA Client Software] ...Version of the Citrix ICA Client ICA Client Configurations [ICA Client Configurations] ...You can set the configuration for the ICA Connection. ICA Client Feature Settings [Configure ICA Client Feature Settings] ...You can configure ICA Client Feature Settings.

  • Page 45: Server

    6-7. Server FTP Service NOTE • Before setting the FTP service, specify the [Password] in the [Control Panel] tab surely. [FTP Service]...If using this eClient as a FTP server, select the FTP Server ON/OFF check box and set the user name, which is used for accessing the product from the other eClient, in the user list.

  • Page 46: Security

    6-8. Security Security Settings [Terminal Security Enable] ...This enables settings on network information of the • Security items Dialog box Terminal Connection Manager Terminal Properties Canceling Settings (1) Display “Terminal Connection Manager”. (2) Press [Shift] and [F2] keys at the same time. (3) “Enter Security Password”...
  • Page 47 (see page 22) of “Terminal Connection Manager” starts up. (“Terminal Connection Manager” is not displayed.) Administrator. Other servers with the Network Administrator will not be able to control the eClient 620L after setting the administration console. 6. USING THE TERMINAL PROPERTIES...

  • Page 48: System

    6-9. System Product Information [Software] ...Microsoft Windows CE Version, Revision [Hardware] ...Serial Number of the unit [Network] ...Network information 6. USING THE TERMINAL PROPERTIES Window Terminal Server Client Revision (Please refer to the page 49 on [Update...].)

  • Page 49: Software Updating/Installation

    Updating is not available if a dial-in is adopted to connect the WTS. • When two or more 620L exists on the same network, the firmware file (OS file only) can be updated by making any 620L as a FTP server (see page 52 for the details).
  • Page 50 “Software Update” dialog box is displayed. [Server:] ...Type IP address or full domain name of the FTP [User Name:]/[Password:] ...Type the user name and password to connect the FTP. [File Name:] ...Type the folder and copied file name located in the NOTE •...
  • Page 51 • In case of updating the built-in software The following message is displayed when you successfully download the software. Click [OK] and restart the eClient 620L. • In case of installing or updating the Add-on software The eClient restarts automatically when you successfully download the software.
  • Page 52 Using the 620L as a FTP server The firmware file can be updated by the 620L set as a FTP server when two or more 620L exists on the same network NOTE • This updating is available for OS file (NK.bin) only.

  • Page 53: Practical Setup

    8-1. 620L settings By utilizing the DHCP Option function of the DHCP Server, necessary information are supplied by the DHCP Server, and each setting is automatically set every time the 620L is turned on. The following information can be obtained by the eClient 620L.
  • Page 54 Command argument to connect to a WTS Fixed – Command (executable file) to connect to a WTS Fixed – Assign the ratio of the client 620L screen to the displayed Window of the WTS. Name displayed on the Connection Manager...

  • Page 55: 620L Settings

    One entry name can be set at the Administration Console function. eClient 620L Settings The eClient 620L’s default setting is set to enable DHCP Options. There is no need for extra settings. After initial setup, confirm the following: • How to obtain an IP address - Confirm the [Obtain an IP address via DHCP] is selected.

  • Page 56: Short Cut Command By Keyboard

    8-2. Short cut command by keyboard Function Brightness Display “Terminal Connection Manager” dialog box (after WTS / Web connection) Display “Terminal Properties” dialog box Canceling the security settings Switching the Active Session of the WTS for the multi session 8. PRACTICAL SETUP Short cut command Increase [Alt] key and [+] key...

  • Page 57: Troubleshooting

    9. TROUBLESHOOTING This page presents problem that can be corrected by the user. If a problem persists even after applying the suggested remedies, contact an EIZO dealer. Problems 1. No picture is displayed on the screen. 2. The following messages appear on...

  • Page 58: Cleaning

    10. CLEANING Periodic cleaning is recommended to keep the monitor looking new and to prolong its operation lifetime. NOTE • Never use thinner, benzene, alcohol (ethanol, methanol, or isopropyl alcohol), abrasive cleaners, or other strong solvents, as these may cause damage to the cabinet or LCD panel.

  • Page 59: Specifications

    11. SPECIFICATIONS Processing Unit Memory Speakers Display LCD Panel Device Dot Pitch Resolution Viewable Image Size Display Color Complying Protocol Software Complying Software for a Windows Terminal Server Mouse Power Supply Power Consumption Interface Connector USB Port Serial Port Line Output Monaural Microphone Dimensions...
  • Page 60 Certifications and Standards 100-120 VAC range 200-240 VAC range Monaural microphone connector is not available now. Applicable to only gray (standard color) version. Dimensions 336 (13.2) 306 (12.0) 167 (6.6) 11. SPECIFICATIONS TÜV/NRTL, c-TÜV, FCC class A, CB, TÜV Rheinland Ergonomics Approved, EPA ENERGY STAR CE, CB, TÜV Rheinland/GS, TÜV Rheinland/Ergonomic ®...

  • Page 61: Reference

    12. REFERENCE 12-1. Attaching an Arm Stand The eClient 620L can be used with an arm stand by removing the tilt stand and attaching the arm stand to the terminal. NOTE • Use an arm stand that satisfies the following.

  • Page 62: Index

    INDEX ADDING & CHANGING A CONNECTION NAME ... 19 Add-on ... 41 Administration Console... 47 Attaching an Arm Stand ... 61 Automatic Logon... 20, 21 Autostart Connection ... 22 Brightness ... 6, 34 Certificates ... 40 Cleaning ... 58 CONNECTING ... 9 connection name...

Table of Contents