Assembly; Operation - Ryobi P730 Operator's Manual

18 volt inflator digital gauge
Hide thumbs Also See for P730:
Table of Contents

Advertisement

UNPACkiNG
This product has been shipped completely assembled.
 Carefully remove the inflator and any accessories from
the box. Make sure that all items listed in the packing list
are included.
 Inspect the inflator carefully to make sure no breakage
or damage occurred during shipping.
 Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the inflator.
 If any parts are damaged or missing, please call
1-800-55-579 for assistance.
PACkiNG LiST
18 Volt Inflator
Tapered Adaptor
Sport Ball Needle
Presta Valve Adaptor
Schrader Valve Removal Tool
Replacement Fuse
Operator's Manual
WARNiNG:
Do not allow familiarity with tools to make you
careless. Remember that a careless fraction of a second is
sufficient to inflict serious injury.
WARNiNG:
Always wear safety goggles or safety glasses with side
shields when operating inflators. Failure to do so could
result in objects being thrown into your eyes, resulting in
possible serious injury.
WARNiNG:
Do not use any attachments or accessories not
recommended by the manufacturer of this tool. The use
of attachments or accessories not recommended can
result in serious personal injury.
WARNiNG:
Do not leave items to be inflated unattended while
inflator is in use. These items can burst and could cause
serious injury.
CAUTiON:
The inflator is not designed for
ten minutes of inflator use, ten minutes of cool down time
when the inflator is not in use is required.

ASSEMBLY

OPERATiON

continuous use. For every
WARNiNG:
If any parts are damaged or missing do not operate
this inflator until the parts are replaced. Failure to heed
this warning could result in serious personal injury.
WARNiNG:
Do not attempt to modify this inflator or create acces-
sories not recommended for use with this inflator. Any
such alteration or modification is misuse and could re-
sult in a hazardous condition leading to possible serious
personal injury.
WARNiNG:
To prevent accidental starting that could cause serious
personal injury, always remove the battery pack from the
inflator when assembling parts.
WARNiNG:
Since the pressure display is not calibrated, and is
therefore not binding for exact values, tire pressure
must be checked using a calibrated measuring device
before driving a vehicle with vehicle tires inflated with the
inflator. Driving a vehicle with improperly inflated tires
could result in serious injury.
CAUTiON:
The inflator is capable of inflating to
or 10.55 Kg/Cm
. To avoid over inflation, carefully follow

instructions on items to be inflated. To avoid product
damage, never exceed recommended pressures.
APPLiCATiONS
You may use this inflator for the purpose listed below:
Inflating air mattresses, sports balls, tires, floats, and
toys
NOTE: The inflator is not designed for commercial
application.
CAUTiON:
If at any point during the charging process none of the
LEDs are lit, remove the battery pack from the charger
to avoid damaging the product. DO NOT insert another
battery. Return the charger and battery to your nearest
service center for service or replacement.
9
150 PSI, 10.34 BAR,

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents