Table of Contents
Advertisement
Step 2:
Later, select Hard Disk Boot Priority under the Advanced BIOS Features menu. In the Hard Disk
Boot Priority submenu, select the model of the SATA hard drive onto which you intent to install
Microsoft Windows 2000/XP (Figure 2).
1. SCSI-0
:
2. Bootable Add-in Cards
: Move
PU/PD/+/-: Change Priority
Step 3:
Set First Boot Device under the Advanced BIOS Features menu to CD-ROM to boot from CD-ROM
after system restarts (Figure 3).
Hard Disk Boot Priority
First Boot Device
Second Boot Device
Third Boot Device
Password Check
# CPU Hyper-Threading
Limit CPUID Max. to 3
No-Execute Memory Protect
CPU Enhanced Halt (C1E)
CPU Thermal Monitor 2(TM2)
CPU EIST Function
: Move
Enter: Select
F3: Language
F5: Previous Values
Step 4:
Save and exit BIOS Setup.
SATA Hard Drives Configurations (Intel ICH7R)
CMOS Setup Utility-Copyright (C) 1984-2005 Award Software
Hard Disk Boot Priority
Intel Volume0
CMOS Setup Utility-Copyright (C) 1984-2005 Award Software
Advanced BIOS Features
(µù)
+/-/PU/PD: Value
F6: Fail-Safe Defaults
F10: Save
Figure 2
[Press Enter]
[CDROM]
[Hard Disk]
[CDROM]
[Setup]
[Enabled]
[Disabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
F10: Save
Figure 3
- 4 -
Item Help
Menu Level
Use < > or < > to
select a device, then
press <+> to move it
up, or <-> to move it
down the list. Press
<ESC> to exit this
menu.
ESC: Exit
Item Help
Menu Level
Select Hard Disk Boot
Device Priority
ESC: Exit
F1: General Help
F7: Optimized Defaults
Advertisement
Table of Contents
