Table of Contents
Advertisement
(3) Configuring RAID set in RAID BIOS
Enter the RAID BIOS setup utility to configure a RAID array. Skip this step and proceed to Section 4 if
you do not want to create RAID.
Step 1:
After the POST memory test begins and before the operating system boot begins, look for a message
which says "Press <Ctrl-I> to enter Configuration utility" (Figure 4). Press CTRL+ I to enter the RAID BIOS
setup utility.
Figure 4
Step 2
After you press CTRL+ I, the Create RAID Volume screen will appear (Figure 5).
Create RAID Volume
If you want to create RAID array, select Create RAID Volume in Main Menu and press ENTER.
Figure 5
- 5 -
SATA Hard Drives Configurations (Intel ICH6R)
Advertisement
Table of Contents
