Changing Pages
Basic Operations
In this section, you will find a description both of the basic methods used to operate your CP5 or CP50 and of the content
displayed on-screen.
Changing Pages
Most of the stage piano's parameter-setting screens comprise a number of different pages. To move through these
screens, either press the [
PAGE] or [PAGE
] button to move one page at a time in the corresponding direction or
press the button with the same label as the page you wish to open ([1] to [10], [A] to [D]). The maximum number of
pages in any screen is 13, and labels are assigned in the following order.
1, 2, 3, 4, 5, 6, 7, 8, 9, 0, A, B, C
Page label
or
Setting Parameters
Each of the three knobs located below the stage piano's display can be turned or pressed to set the parameter assigned
to it on the current page. Specifically, a knob can be turned clockwise to increase a value and counter-clockwise to
decrease it.
Parameter name
Parameter value
Knob 1
Knob 2
Knob 3
19
CP5/CP50 Owner's Manual