Product Specifications - Gigabyte GA-880GM-USB3 User Manual

1-2

Product Specifications

CPU AM3+ Socket:
Š
-
-
(Go to GIGABYTE's website for the latest CPU support list.)
Hyper Transport
5200 MT/s
Š
Bus
North Bridge: AMD 880G
Š
Chipset
South Bridge: AMD SB710
Š
Memory 4 x 1.5V DDR3 DIMM sockets supporting up to 16 GB of system memory
Š
Dual channel memory architecture
Š
Support for DDR3 1800 (O.C.)/1333/1066 MHz memory modules
Š
(Go to GIGABYTE's website for the latest supported memory speeds and memory
modules.)
Onboard North Bridge:
Š
Graphics -
-
-
Audio Realtek ALC889 codec
Š
High Definition Audio
Š
2/4/5.1/7.1-channel
Š
Support for Dolby
Š
Support for S/PDIF Out
Š
LAN 1 x Realtek RTL8111E chip (10/100/1000 Mbit)
Š
Expansion Slots 1 x PCI Express x16 slot, running at x16
Š
1 x PCI Express x1 slot
Š
(All PCI Express slots conform to the PCI Express 2.0 standard.)
2 x PCI slots
Š
Multi-Graphics
Support for ATI Hybrid CrossFireX
Š
Technology
Storage Interface South Bridge:
Š
-
-
-
Hardware Installation
AMD AM3+ processor
AMD AM3 Phenom II processor/ AMD Athlon
™
* Due to Windows 32-bit operating system limitation, when more than 4 GB of physical
memory is installed, the actual memory size displayed will be less than 4 GB.
* To reach DDR3 1800 MHz or above, you must install two memory modules and install
them in the DDR3_3 and DDR3_4 memory sockets.
1 x D-Sub port
1 x DVI-D port, supporting a maximum resolution of 1920x1200
* The DVI-D port does not support D-Sub connection by adapter.
1 x HDMI port, supporting a maximum resolution of 1920x1200
* Simultaneous output for DVI-D and HDMI is not supported.
Home Theater
®
™
5 x SATA 3Gb/s connectors supporting up to 5 SATA 3Gb/s devices
1 x eSATA 3Gb/s port on the back panel supporting up to 1 SATA 3Gb/s
device
Support for SATA RAID 0, RAID 1, RAID 10, and JBOD
- 10 -
II processor
™
technology