Garmin Pilot User's Guide for Android User Manual page 113

Configuring the GDL 39 for a Pressurized or Non-Pressurized
Aircraft:
1) From any page tap
2) Tap the GDL 39 Tab.
3) Tap Pressurized Cabin to select/deselect.
NOTE: Relative altitude information will only be displayed if Pressurized Cabin is not
selected.
Enabling/disabling traffic data on the Map Page:
1) From any page tap
2) Tap
.
3) Select Show Traffic.
Viewing the Traffic Page:
1) From any page tap
2) Tap
Changing the altitude range:
1) On the Traffic Page, Tap Altitude Filter.
2) Tap one of the following options:
• Unrestricted: All available traffic is displayed.
• Above: Displays non-threat and proximity traffic from 9000 feet
above the aircraft to 2700 feet below the aircraft. Typically used during
climb phase of flight.
• Normal: Displays non-threat and proximity traffic from 2700 feet
above the aircraft to 2700 feet below the aircraft. Typically used during
enroute phase of flight.
• Below: Displays non-threat and proximity traffic from 2700 feet
above the aircraft to 9000 feet below the aircraft. Typically used during
descent phase of flight.
190-01532-00 Rev. A
>
>
>
to change the range for the traffic rings.
Garmin Pilot for Android User's Guide
.
.
.
Fly
97