Table of Contents
Advertisement
4 Connect to
your home Wi-
Fi network for
AirPlay
To connect AD7050W to your existing home
Wi-Fi network, you need to apply your home
Wi-Fi settings to AD7050W.
Choose your best setup method based on the
preconditions listed below.
Precondition
You have an iPod
touch/iPhone/iPad
upgraded to iOS 5.0
or later.
Your Wi-Fi router is
enabled with WPS
(Wi-Fi Protected
Setup) and supports
PBC (Push Button
Connection).
EN
10
Setup method
Choose method 1
(recommended) (see
'Method 1: Use iOS5
Wi-Fi network login
sharing' on page 10).
Choose method
2 (see 'Method 2:
Connect to a WPS
router' on page 11).
You have a Wi-Fi
enabled device with
an Internet browser,
such as an iPod touch/
iPhone/iPad or a Wi-Fi
enabled PC/Mac.
Before connection of AD7050W to you home
Wi-Fi network, make sure that:
a your Wi-Fi router is powered on and
working properly.
b AD7050W has been powered on
and booted up successfully (see 'Turn
AD7050W on' on page 9).
Once connected successfully, AD7050W will
remember your home Wi-Fi settings. Then
you can enjoy AirPlay whenever AD7050W is
powered on and connected to your home Wi-
Fi network automatically.
Method 1: Use iOS5 Wi-Fi
network login sharing
1
Connect your iPod touch/iPhone/iPad to
your home Wi-Fi network.
2
Connect an Apple USB cable (not
supplied) to:
• the USB
AD7050W.
• the dock connector on your iPod/
iPhone/iPad.
Choose method
3 (see 'Method 3:
Connect to a non-
WPS Wi-Fi router' on
page 12).
socket on the back of
Advertisement
Table of Contents
