Connect To Your Home Wi-Fi Network For Airplay; Scenario 1: Connect To A Wps Router - Philips DS3880W/10 User Manual

4 Connect to
your home Wi-
Fi network for
AirPlay
To connect DS3880W to your existing home
Wi-Fi network, you need to apply your home
Wi-Fi setting to DS3880W.
You can do this in two ways (depending on
which type of Wi-Fi router you use):
‡ Automatically - if your Wi-Fi router is
WPS (Wi-Fi Protected Setup)-enabled
and supports PBC (Push Button
Connection) (see 'Scenario 1: Connect
to a WPS router' on page 12)
‡ Manually - if your Wi-Fi router does
not support WPS (see 'Scenario 2:
Connect to a non-WPS router' on
page 13)
Once connected successfully,
DS3880W will remember your
home Wi-Fi settings. Then you can
enjoy AirPlay whenever DS3880W is
powered on and connected to your
home Wi-Fi network automatically.
12 EN
All manuals and user guides at all-guides.com
Before connection of DS3880W to
you home Wi-Fi network, check the
points below.
1
Make sure that your Wi-Fi router is
powered on and working properly.
2
Make sure that DS3880W has been
powered on and booted up successfully
(see 'Turn DS3880W on' on page 11).
3
Identify the type of your Wi-Fi router (see
the user manual of your Wi-Fi router for
details).
Scenario 1: Connect to a
WPS router
Note
‡
Before you press any button on DS3880W, make sure
that DS3880W has been booted up successfully (see
'Turn DS3880W on' on page 11).
1
Press the WPS button on your home Wi-Fi
router.
WPS
2
Shortly after step 1, press Wi-Fi SETUP on
the back of DS3880W.
» The Wi-Fi SETUP indicator blinks red,
yellow and green alternately.