Canon EOS D30 Software User's Manual page 109

Chapter 6
Using Supplementary Features
Other Remote Shooting Features
Interval Timer Shooting
Interval timer shooting is the method of capturing images in
which a set number of frames is recorded at set intervals of time.
REFERENCE
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
• You may not be able to record at the set interval if it is too short
for the camera to transfer and save the image data.
Timer Shooting
Timer shooting is the method by which a single image is
recorded after a set number of seconds.
Click the [Shooting] menu in the
RemoteCapture Task window and select
[Timer Shooting] to open a window like
the one shown here. Set the number of
seconds for the delay and click [Start]. The
timer may be set to a range from 2
seconds to 30 seconds.
109
ZoomBrowser EX Software User Guide
Operating the Camera Shutter from the Computer (3/4)
Click the [Shooting] menu in the
RemoteCapture Task window and select
[Interval Timer Shooting] to open a
confirmation dialog. Click [OK] to open
a window like the one shown here. Set
the values and click [Start] to start
shooting. The interval may be set to a
range from 5 seconds to 60 minutes.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Saving and Recalling Shooting Settings
You can save the current zoom settings and the settings in the
"Field angle/flash" and "Shooting settings" tabs by clicking the
[File] menu in the RemoteCapture Task window and selecting
[Save Shooting Settings].
Later when you wish to recall those settings, click the [File]
menu in the RemoteCapture Task window and select [Batch
Shooting Settings].
Displaying the Subject in the Camera's LCD Monitor
You can use the camera's LCD monitor or a television
connected to the camera to view the subject while shooting
remotely.
○ ○ ○ ○ ○ ○ ○
REFERENCE
○ ○ ○ ○ ○
• See the Camera User Guide for instructions for connecting the
camera to the television.
Click the [Camera] menu in the
RemoteCapture Task window and select
[Camera Display Settings] to open a window
like the one shown here.
Select [Camera LCD monitor] or [Video Out
terminal] and click [OK].
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○