Olympus C-770 - Ultra Zoom 4MP Digital Camera Reference Manual page 209

Troubleshooting
When the camera is connected to a PC or printer.
Possible cause
The printer fails to connect.
PC was selected on the
monitor after connecting
to the printer with a USB
cable.
The printer does not
support PictBridge.
The camera is not recognized by the PC.
The USB driver has not
been installed.
The camera has not been
turned on.
11
208
Corrective action
Remove the USB cable, and start again from
step 1 of "Connecting the camera to a
printer".
Refer to the printer's instruction manual or
contact the manufacturer.
It is necessary to install the USB driver for
Windows 98/98SE. For installation
instructions, see "DIGITAL CAMERA-PC
CONNECTION OPERATION MANUAL" on
the CD-ROM.
Slide the power switch to q to turn the
camera on.
Ref. page
P.185
—
—
P.25