Olympus C-770 - Ultra Zoom 4MP Digital Camera Reference Manual page 203

Troubleshooting
Possible cause
The viewfinder does not turn on.
The monitor is turned on.
The monitor does not turn on.
The viewfinder is turned
on.
The viewfinder or monitor is hard to see.
The diopter is not
adjusted properly.
There is condensation
inside the camera.
The brightness of the
viewfinder or monitor is
not adjusted properly.
The monitor is exposed to
direct sunlight.
Vertical lines appear in
the viewfinder or on the
monitor screen during
shooting.
The date recorded with the image data is wrong.
The date/time is not set.
The camera has been left
with the battery removed.
The settings are returned to the factory default settings when the camera is
turned off.
ALL RESET is set to ON.
11
202
Corrective action
Press f to turn the viewfinder on.
Press f to turn the monitor on.
Adjust the diopter so that the AF target mark
is clearly visible.
*
Wait until the camera dries before turning it
on again.
Select s in the mode menu tab and adjust
the brightness.
Block the sunlight with your hand or use the
viewfinder.
Aiming the camera at a bright subject in
sunlight may cause vertical lines to appear on
the screen. This is not a malfunction.
Set the date/time. The clock adjustment is not
factory-preset.
If the camera is left for one day with the
battery removed, the date/time setting is
canceled. Set the date/time again.
Select the SETUP tab in the mode menu and
set ALL RESET to OFF.
Ref. page
P.51
P.51
P.32
—
P.161
—
—
P.30
P.19, 30
P.147