Table of Contents
Advertisement
The following section introduces display properties settings using the classic NVIDIA control
panel interface as the example.
GeForce 7900 GS properties
You can select other properties from the pop-out menu.
nView Display Settings properties
(Note) Only Single display mode is available when SLI mode is enabled.
This page shows the Adapter, System and
Driver version information.
(Note)
nView allows you to connect separate displays to single
graphics card.
• nView Display mode: select your preferred nView display
modes here.
Options: Single display/ Clone/ Horizontal Sapn/
Vertical Span/ Dual View
• Primary/Secondary display: select a single display or
display pair. The selected display combination will appear
in the graphical representation below.
• Make this the primary display: Specifies that the display
corresponding to the icon you selected above is the
primary display.
• Click Apply to apply settings or click OK to save settings.
If TV is chosen as the display, you will need to select the
proper TV format. To do this, click Device Settings followed
by Select TV format. Select the format for your television
and then click Apply followed by OK.
Model
Display
CRT+TV
Matrix
CRT+DVI
DVI+TV
DVI+DVI
- 17 -
GV-NX79G256DP-RH
Yes
Yes
Yes
Yes
Software Installation
Advertisement
Table of Contents
