Insignia NS-L46X-10A Firmware Update Manual page 2

5. Using your remote control arrow keys, make sure the "Yes" button is highlighted and press
enter/OK on the remote. The software update will then begin
Note: DO NOT TURN THE POWER OFF OR UNPLUG DURING THE UPDATE
Note: During the software update, a progress bar will appear displaying the progress of the
update; this update takes approximately one (1) minute.
6. Once the update has completed, a screen similar to the one shown below will appear:
7. Remove the USB flash drive (stick) from the TV.
8. Press the Enter/OK key on the remote control, TV will then restart.