Gigabyte GV-NX76T128D-RH User Manual page 22

nView Display Settings properties *
"*" Only Single display mode is available
when SLI mode is enabled.
Dual-Monitor Setup:
You can set the display to output from two monitors on the nView Display Settings page.
The GV-NX76T128D-RH supports the following modes.
(1) Clone Mode:
Clone mode indicates that both displays in the
display pair show images of the same desktop.
Select Clone from the nView Display Mode list
and click Apply.
(2) Dual View Mode:
Dualview mode indicates that both displays in the
display pair function as one virtual desktop. Unlike
Horizontal Span or Vertical Span mode, Dualview
treats each display as a separate device. This
means that the taskbar will not be stretched across
displays and 3D applications are not accelerated
as efficiently as when the application spans
displays.
Select DualView from the nView Display Mode
list and click Apply.
GV-NX76T128D-RH Graphics Accelerator
nView allows you to connect separate displays to single
graphics card.
• nView Display mode: select your preferred nView display
modes here. Options: Single display/ Clone/ Dualview
• Primary/Secondary display: select a single display or
display pair. The selected display combination will appear
in the graphical representation below.
• Make this the primary display: Specifies that the display
corresponding to the icon you selected above is the
primary display.
• Click Apply to apply settings or click OK to save settings.
If TV is chosen as the display, you will need to select the
proper TV format. To do this, click "Device Settings" followed
by "Select TV format". Select the format for your television
and then click "Apply" followed by "OK".
Model
Display
CRT+TV
Matrix
CRT+DVI
DVI+TV
- 20 -
GV-NX76T128D-RH
Yes
Yes
Yes
Clone Mode
Dual View Mode