Copying All Files - JVC GZ-V500BUS Detailed User Manual

User manual - english
Hide thumbs Also See for GZ-V500BUS:
Table of Contents

Advertisement

Copying All Files

All videos or still images recorded on this unit will be copied.
You can also select and copy only the videos or still images that have never
been copied.
1
Select video or still image mode.
2
Tap "BACK UP".
VIDEO BACKUP
BACK UP
.
3
Tap the desired method.
BACK UP
ALL SCENES
UNSAVED SCENES
.
"ALL SCENES" (video)/"ALL IMAGES" (still image):
0
All videos or still images in this unit are copied.
"UNSAVED SCENES" (video)/"UNSAVED IMAGES" (still
0
image):
Videos or still images that have never been copied are automatically
selected and copied.
4
Check that there is sufficient remaining space on the hard disk drive and
tap "YES".
ALL SCENES
REQ SPACE : 147MB
FREE SPACE : 0,007,768MB
START TO BACKUP?
YES
.
Backup starts when "YES" is tapped.
0
15 SCENES
NO
5
Tap "OK" when "COMPLETED" is displayed.
ALL SCENES
.
6
Press and hold the M button for 2 seconds or more to turn off this unit
and disconnect the USB cable.
Caution :
Do not turn off the power or remove the USB cable until copying is
0
complete.
Files that are not on the index screen during playback cannot be copied.
0
Special files cannot be copied either.
Copying may take time. (For example, saving 1 hour video in XP mode
0
takes about 20 minutes.)
Copying
SAVED
OK
99

Advertisement

Table of Contents
loading

This manual is also suitable for:

Everio gz-v500

Table of Contents