Product Features - VTech Pull & Learn Car Carrier User Manual

PRODUCT FEATURES

1. ON/OFF/VOLUME CONTROL SWITCH
To turn the unit ON, slide the ON/OFF/
VOLUME CONTROL SWITCH to
the LOW VOLUME (
VOLUME (
unit OFF, slide the ON/OFF/VOLUME
CONTROL SWITCH to the OFF (
position.
2. PULL CORD
To convert the unit from a push toy to
a pull toy, remove the pull cord from
the battery compartment and thread it
through the eyelet on the bottom of the
car carrier. For your child's safety, we
suggest you store the pull cord in the
compartment until your child is walking.
3. WHEELS
Before using the VTech
Car Carrier
out to the outer groove position on
the axle. Please check the wheels
from time to time to ensure they
haven't been pushed back to the inner
position.
4. AUTOMATIC SHUT-OFF
To preserve battery life, the VTech
automatically power-down after approximately 40 seconds without
input. The unit can be turned on again by pressing any button.
) or the HIGH
) position. To turn the
Pull & Learn
®
, please pull each wheel
™
)
Pull & Learn Car Carrier
®
will
™