Creating A Three-Way Conference Call - Cisco WIP320 User Manual

Using Basic Phone Functions

Creating a Three-Way Conference Call

Creating a Three-Way Conference Call

Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W
You can easily create a three-way conference call on your phone.
Task
Starting a three-way
conference call
Combining two or more
current calls to create a
three-way conference
Ending a conference call
for all parties
Instructions
1. After beginning a call with the first party, initiate
the conference on your phone:
• Cisco SPA301: Press
• Cisco SPA501G: Press the Conference
button
.
• Other models: Press
2. When you hear a dial tone, enter the extension or
the phone number for the third party. For an
outbound call, include the dialing prefix required
to get an outside line, as well as any long-
distance prefix required for your phone service.
(No dialing prefix is required on a shared line.)
3. Press ,
FLASH
Not available on Cisco SPA301 and Cisco
SPA501G
Press or
Conflx Conf Line
• If you have only one held call, the three-way
conference call is automatically created.
• If you have more than one held call, the phone
prompts you to choose a held call to add to the
conference. Press a line button to select a held
call.
Hang up. All parties are disconnected.
.
FLASH
.
Conf
, or again.
Conf
.
2
49