Choosing An Audio Device - Cisco WIP320 User Manual

Using Basic Phone Functions

Choosing an Audio Device

Choosing an Audio Device

NOTE
Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W
Before placing a call, select an audio device: the handset, the built-in speaker, or a
compatible third-party headset that you have installed. Typically, only one audio
device is used at a time.
For information about headsets, see
(Optional)" section on page
Task
Using the handset
Using the speaker
Using a headset
Switching from the
handset to the speaker
during a call
Switching from the
handset to a headset
during a call
"Connecting Wired and Wireless Headsets
15.
Instructions
Lift the handset off the hook.
Press or the line button (if the speaker is your
Preferred Audio Device). The handset can be either
on or off hook. Note: For more information, see
Choosing your preferred audio device
Not available on Cisco SPA301
Press on your phone. The handset can be either
on or off hook. Note: When the headset is your
Preferred Audio Device, simply begin dialing a
number while the handset is on hook. See
your preferred audio device
Press and verify that the button is lit. Place the
handset on the hook or leave it off hook.
Not available on Cisco SPA301
Press and verify that the button is lit. Place the
handset on the hook.
2
in this table.
Choosing
in this table.
27