Setting Or Changing The Password - Dynex DX-32L100A11 User Manual

Setting parental controls
2 Press or to highlight Setup, then press . The Setup menu
opens.
Parental Controls
Time
Closed Caption
Menu Settings
VGA Settings
Input Label
Restore Default
Audio Only
Move
3 Press ENTER. The Enter Password screen opens.
Enter Password
4 Press the number buttons to enter the four-digit password. The
default password is 0000. The Parental Controls sub-menu opens.
5 Press or to highlight System Lock, then press or to
select On (to enable the blocking scheme you set up and to set
up the blocking scheme (otherwise the rating setting cannot be
accessed) or Off (to disable the blocking scheme you set up).
6 Press EXIT to close the menu.

Setting or changing the password

To set the parental password:
1 Press MENU. The on-screen menu opens.
Picture Mode
Contrast
Brightness
Color
Tint
Sharpness
Backlight
Advanced Video
Move
Picture Audio Setup Channel
Off
Select Exit
MENU
Picture Audio Setup Channel
_ _ _ _
Picture Audio Setup Channel
Custom
70
40
60
0
50
30
Select Exit
MENU
2 Press or to highlight Setup, then press . The Setup menu
opens.
Picture
Parental Controls
Time
Closed Caption
Menu Settings
VGA Settings
Input Label
Restore Default
Audio Only
Select
Move
3 Press ENTER. The Enter Password screen opens.
Picture
Enter Password
4 Press the number buttons to enter the four-digit password. The
default password is 0000. The Parental Controls sub-menu opens.
5 Press or to highlight Change Password, then press
ENTER. The password entry screen opens.
Picture
Enter Old Password
Enter New Password
Confirm Password
Move Select
6 Press the number buttons to input old password, then input a
new password. On the next line, enter the new password again to
confirm it. The Parental Controls sub-menu reopens.
Note: If you forget your password, enter 9999.
7 Press EXIT to close the menu.
19
DX-32L100A11
Audio Setup Channel
Off
MENU Exit
Audio Setup Channel
_ _ _ _
Audio Setup Channel
_ _ _ _
_ _ _ _
_ _ _ _
Exit
MENU