HP Integrity Superdome SX1000 Recovery Manual page 21
Integrity servers with microsoft windows server 2008 for itanium-based systems recovering windows server 2008 on hp integrity servers
Hide thumbs
Also See for Integrity Superdome SX1000:
- User manual (332 pages) ,
- Datasheet (411 pages) ,
- Installation manual (114 pages)
Table of Contents
Advertisement
3.
Restart your server.
4.
If you are prompted to press a key to start the server from CD, press the appropriate key.
5.
If you have a separate driver file, use the driver as part of Setup by pressing F6 when
prompted.
6.
When prompted at the beginning of the text-only mode section of Windows Setup, press
F2.
Figure 1-2 Windows Setup screen
7.
When prompted, insert the ASR diskette and follow the directions on the screen.
Figure 1-3 Windows Setup screen
Windows Setup proceeds to format the C: drive. Setup then installs a minimal operating system
on the C: drive and restores information stored on the back up target device. If you backed up
Automatic System Recovery (ASR)
21
Advertisement
Table of Contents
