Installing The System Fans - Lenovo ThinkServer RD240 User Manual

(english) installation and user guide
Hide thumbs Also See for ThinkServer RD240:
Table of Contents

Advertisement

6. For each system fan, press it downward while holding the buckle
fan straight up to remove it out of the chassis
Note: Mind the system fan cables. Remove the cables from any clip before removing the system fans.
Figure 55. Removing the system fans
7. If you are instructed to return the system fans, follow all packaging instructions and use any packaging
materials that are supplied to you for shipping.
8. To install new system fans, see Installing the system fans.

Installing the system fans

Attention: Do not open your server or attempt any repair before reading and understanding the "Safety information"
on page iii and "Guidelines" on page 19.
This section provides instructions on how to install the system fans.
CAUTION:
Hazardous moving parts. Keep fingers and other body parts away.
1
. Then, carefully lift the system
2
.
.
Chapter 5
Installing, removing, or replacing hardware
63

Advertisement

Table of Contents
loading

Table of Contents