Connecting the Power Cable
1 On the back of the enclosure, connect the mains power cable to the
enclosure's power sockets.
2 Plug the other end of the power cables into a grounded electrical outlet or
a separate power source such as an uninterrupted power supply or the
PowerEdge C8000EP PDU.
Turning On the System
When connected to a power source, main power is automatically distributed
to the server enclosure. After the server enclosure is powered up the
power/event indicator on the front of the enclosure will light up green and
main power is applied to all sleds in the enclosure.
16
Getting Started With Your System