Table of Contents
Advertisement
b Steps of using the operation buttons and description of each step.
SOAK
WASH
RINSE
SPIN
Push the "POWER ON/OFF " button to switch on the power.
It has the special power resume function. In the case of power failure
or the power plug is loose during washing, the machine can save
the running program, and resume the program after the power
supply is recovered. You do not need to set the program again.
Push the "PROGRAM" button to select the suitable
automatic program.
After switching on the power, the machine will set common program automatically. To select other
automatic program, push the "program" button till the relative indicator is light or flash. Refer to the
"program button" on Page 11 for the selection. For instance: select "QUICK"rogram for laundries
with small quantity and light soil.
In selecting the common and standard program, the machine will execute fuzzy program
to select water level and wash time according to the cloth and weight of the laundries.
The full procedure is controlled automatically.
Push the "PROCESS/FUNCTION"button to select suitable procedure and function.
Attention
Even there's no water in the tub, a certain period is required before spin starting.
Do not use the soak program for the woolen textiles
Wash and spin after putting the damageable clothes into tuck net, to avoid scathe.
The soak procedure can work in cooperation with automatic programs like common, cotton, standard, jeans, fibre. There
is intermittent pulsator stirring during soak.
After the machine starts operation, you can only set the program and procedure during soak washing, and can not
make setting in other cases.
FLASH
HEAVY WASH
HEAVY RINSE
HEAVY SPIN
GENTLE SPIN
DELAY
12
LIGHT
LIGHT FLASH
FUZZY
COMMON
STANDARD
QUICK
FIBRE
GENTLE
COTTON
JEANS
TUB DRY
POWER
PROGRAM
Page 11
Advertisement
Table of Contents
