HP Kayak XA-s02 User Manual page 40

geron.bk : geron-2.fb4 Page 28 Sunday, March 22, 1998 5:03 AM
WARNING
Slide the power
supply unit clear of
the computer
Replacing the Power
Supply after Installing
Accessories
2 How to Install Accessories Inside Your PC Workstation
Moving the Power Supply
To avoid electrical shock, do not open the power supply.
6 Slide the power supply out of the computer until it stops—the power
supply unit remains connected to the computer.
1 Check that all internal cables are safely routed.
2 Slide the power supply back into the computer.
3 Tighten the four self-retaining screws.
4 Replace the HP UltraFlow airflow guide.
5 Reconnect the fan to the system board.
28 English
Power Supply