Advertisement
Bass Joint
Insert halfway
2.
Rotate the bass joint so that the tenor joint
comes into contact with the stopper on
the bass joint.
Stopper
3.
Continue to insert the bass joint, all the
way into the socket.
Fully insert
• As shown in the illustration below, gently
Double Joint
1.
2.
Assembly
Attaching the Bell
hold the bell key pad down to raise the
connection at the opposite end, and insert
the bell section into the bass joint.
* Take care not to apply too much pressure
on the bell key pad.
Attaching the Hand Rest
Screw the hand rest into its holder
stopping at a comfortable position.
* Take care not to over tighten the hand rest.
Tighten the ring on the screw to secure
the hand rest.
21
Advertisement
