Safety Information; Installation Hints; Operation And Maintenance - Oki OKIOFFICE84 Regulatory Information

Safety Information

Overview

Installation Hints

• Install your OKIOFFICE 84 MFP in a dust-free location
away from direct sunlight.
• Do not plug your MFP into a power source shared by
equipment which produces electrical noise (i.e., air
conditioners, etc.).
• Leave electronic adjustments to authorized service
personnel.
• The LINE terminal connects your fax machine to a
standard telephone line. To avoid damage to your
telephone system or to the MFP, do not plug your fax
machine into anything other than a standard RJ-11C jack.
• Your MFP is intended to be grounded electrically and is
equipped with a three-wire grounded power cord. For your
safety, do not attempt to defeat your power cord's
grounding plug.
|
16 Warranty, Regulatory Information, and Specifications
• The power outlet should be located near the equipment
and should be easily accessible.
• The TEL port on the back of the unit is only suitable for
2-wire devices. Not all standard telephones will respond to
incoming ringing when connected to an extension socket.
• This equipment may not necessarily provide for the
effective hand-over of a call from a telephone connected
to the same line.

Operation and Maintenance

• Use a dry cloth to clean the control panel and the main
body of the unit.
• Aside from replacing the toner and image drum cartridge,
do not disassemble or attempt to service this unit yourself.
Refer to a qualified technician for service. See the
"Service and Support" section of your User's Handbook.