Table of Contents
Advertisement
22 Getting Started
To install the battery
Install the battery by inserting
it with its exposed copper part
aligned with the protruding copper
conductor on the lower-left side of
the battery compartment.
Insert the bottom side of the
battery first, then gently push the
battery into place.
To remove the battery
1.
Make sure your device is turned off.
2.
Remove the back cover.
3.
To remove the battery, lift it up
from the top end of the battery.
To install the microSD™ card
1.
Pry open the rubber cover at the
bottom-left side of the device.
2.
Insert the microSD card with the
gold contacts facing up.
3.
Close the rubber cover.
Tip
Press the microSD card to pop it out of the slot.
Advertisement
Table of Contents
