Table of Contents
Advertisement
174 Experiencing Multimedia
•
Keep Backlight. Turn the backlight on or off. This overrides your
device backlight settings while you are using the camera.
•
Review Duration. Set a time length for displaying the captured
image/video on the Review screen. Select No Limit if you do not want
to impose a time limit. Select No Review to immediately return to the
live Camera screen after capturing and saving.
•
Flicker Adjustment. When taking indoor shots, flicker on the camera
screen may be caused by inconsistencies between the vertical scan
rate of the camera display and the flicker frequency of fluorescent
lighting. To reduce flicker, you can change the flicker adjustment
setting to Auto or to the proper frequency (50Hz or 60Hz) of the
country where your device is being used.
•
Record with Audio (Video and MMS video modes only). Select On
to record audio with the captured video clips, or select Off to capture
video without audio.
•
Prefix. When Default is selected as the prefix, the file name of each
new captured file is set to "IMAGE" or "VIDEO" followed by a sequential
number, for example: IMAGE_001.jpg. You may also choose to name
files using either the current Date or Date & Time as the prefix.
If you set the Camera to save captured photos to a storage card, the
prefix cannot be selected. Captured photos will be named using the
convention IMAGnnnn.jpg (where 'nnnn' is the counter) which is the
DCIM (Digital Camera Images) naming standard, and will be saved to
the \DCIM\100MEDIA folder on the storage card.
•
Counter. To reset the file naming counter back to 1, tap Reset.
Grid
Advertisement
Table of Contents
