HTC Touch Diamond2 Quick Start Manual page 25

4.
Tap the name of the Bluetooth headset in the list to automatically pair it with your
device. When connected, this icon (
headset name.
Note
If automatic pairing fails, manually enter the headset passcode when prompted.
If the Bluetooth stereo headset is disconnected, turn the stereo headset on, repeat steps 1
and 2, and then tap the stereo headset name under the Previously Paired Headsets section
to connect.
To connect your device with other Bluetooth devices
1.
Make sure that both your device and the other Bluetooth device are turned on and
within close range, and that the other device is visible. Refer to the Bluetooth device
documentation on how to set it to visible mode.
2. Tap Start > Settings, and then tap Menu > Bluetooth Devices > Devices tab.
3. Tap Add new device. Your device then displays the names of other Bluetooth
devices within range.
4. Tap the device name in the box, then tap Next.
5.
Specify a passcode to establish a secure connection. The passcode can be 1 up to 16
characters. Tap Next.
6.
Wait for the paired device to accept the partnership. The receiving party needs to
enter the same passcode that you specified.
7.
The name of the paired device is then displayed. You may edit and enter a new name
for that device.
8.
Select the check boxes of services that you want to use from the paired device, and
then tap Finish.
For more information about using Bluetooth, refer to the "Bluetooth" chapter in the User
Manual PDF.
) appears at the right side of the Bluetooth
Quick Start Guide 25