Bluetooth - HTC Touch Diamond2 Quick Start Manual

21. Bluetooth

To connect a Bluetooth hands-free or stereo headset
1.
Make sure that both your phone and the Bluetooth headset are turned on and
within close range, and that the headset is visible. Refer to the Bluetooth headset
documentation on how to set the headset in visible mode.
2. Tap Start > Settings, tap Communications, and then tap Bluetooth.
3. Tap Add new Bluetooth headset. The phone scans for Bluetooth headsets within range.
4.
Tap the name of the Bluetooth headset in the list to automatically pair it with your
phone. When connected,
Note
If automatic pairing fails, manually enter the headset passcode when prompted.
If the Bluetooth stereo headset disconnects, turn the stereo headset on, repeat steps 1 and 2,
then tap the stereo headset name under the Previously Paired Headsets section to reconnect.
To connect your phone with other Bluetooth devices
1.
Make sure that both your phone and the other Bluetooth device are turned on and
within close range, and that the other device is visible. Refer to the Bluetooth device
documentation on how to set it to visible mode.
2. Tap Start > Settings, and then tap Menu > Bluetooth Devices > Devices tab.
3. Tap Add new device. Your phone then displays the names of other Bluetooth
devices within range.
4. Tap the device name in the box, then tap Next.
5.
Specify a passcode to establish a secure connection. The passcode can be 1 up to 16
characters. Tap Next.
6.
Wait for the paired device to accept the partnership. The receiving party needs to
enter the same passcode that you specified.
7.
The name of the paired device is then displayed. You may edit and enter a new name
for that device.
8. Select the check boxes of services that you want to use from the paired device, and
then tap Finish.
For more information about using Bluetooth, refer to the "Bluetooth" chapter in the User
Manual PDF.
appears at the right side of the Bluetooth headset name.
Quick Start Guide 27