Using The Mounting Bracket - Nextar X3-08 User Manual

Using The Mounting Bracket

When using the unit in vehicle, you can use the supplied mount accessories (mount
bracket, mount cradle and dashboard mount disk) to mount the unit in the vehicle.
Take the following steps to operate:
1. Following the arrow,silde the mount cradle onto the mount bracket.
2. See Fig. 2. Fix the unit on the mount cradle.
3. See Fig. 3. Lift the suction cup lever and then press the suction cup to the
windshield. Following arrow(1),press down the suction cup lever. Then rotate the
knob to adjust the unit to proper position.
To mount to dashboard, use the included adhesive disk. Choose a clean, dry spot
on your dashboard, peel off protection liner from the back of the disk, and then
attach the disk to your dashboard.
Note: Keep the suction cup and the interior of the windshield clean to ensure good
adhesion.
Warning:
When you mount the device in your vehicle, please make that it has a clear line of sight
to the sky. The device must not be mounted in places that will impairs the driver's view
of the road. Please take extra precaution to ensure the airbags are not obstructed by
the device.
9