Using An Address As A Destination - Nextar X3-07 Manual

Using an address as a destination

When you use an address for a destination, you must know at least the name of the street
and the city. Guidance directions will be more accurate if you also know the street number
of the destination.
Note: If you already have a destination, you can tap New to set a new destination.
There are two ways to enter the address: by selecting the street first, or be
selecting the city first. If you use Street First and too many records match, you will
be asked to use City First.
To enter an address as a destination using Street First:
1. Tap MENU. The main menu appears.
2. Tap Destination. The Set Destination screen appears.
3. Tap Address. The Input Method screen appears.
4. If you need to change the region:
Tap Change State. The Enter State Name screen
•
appears.
Tap the letters to enter the name of the region, or tap
•
the name of the region.
Tap OK when you have selected the region. You return
•
to the Input Method screen.
- 10 -