Setting A Destination Using Crossroads - Nextar Q4-01 Hardware Instruction Manual

If the latter happens, begin spelling the POI name. Within a few characters, the
system will display the matching list.
•
Select the desired POI from the displayed list.
•
Tap GO to calculate the route and view the turn-by-turn instructions.
—Or—
Tap SAVE & GO to save the destination as a location in the Favorites list before
receiving turn-by-turn instructions. The system will prompt you to enter a location
name before continuing.
—Or—
Tap SET ORIGIN to set this location as the vehicle starting position.

Setting a Destination Using Crossroads

The crossroads method of setting a destination involves knowing and entering the name
of two streets that intersect in order to have the system calculate a route to that point.
When using this method, note that the system will first prompt you to set the primary
street and then the intersecting street.
To set a destination using crossroads
1. From the main screen, tap MENU, and then choose GO TO. The Enter
Destination screen opens.
2. If necessary, tap the CROSSROAD tab located at the top of the screen. The main
options for setting a crossroad-based destination appear in the main display. (See
below.)
Crossroad options for the Enter Destination screen
33