HANNspree HANNSz.dog Quick Start Manual

K206 9.6" Liquid Crystal Display TV
This guide is designed as a reference to help you start using your LCD TV quickly.
Please refer to the User's Manual for more detailed installation and safety instructions.
Front View Front View
Speaker
Volume
adjust
Menu
Remote IR sensor

Making Connections

Connecting to Antenna/Cable TV
Antenna
DC 12V 4-IN-1 HEADPHONE ANT
ANT jack
(VHF/UHF IN Jack)
DC 12V 4-IN-1 HEADPHONE ANT
Antenna/CATV
coaxial cable
Connecting to a VCR, VCD, DVD Player, or Video Game Console
1. The illustration presented
here shows you how to
connect your TV to a
VCR, VCD, DVD player
or video game console.
4-IN-1 A/V jack
DC 12V
Video game console
B
R
W
Y
4-IN-1 A/V cable

Connecting the Power Adapter

Power outlet
DC 12V 4-IN-1 HEADPHONE ANT
Power cord
DC 12V 4-IN-1 HEADPHONE ANT
DC-IN
Power adapter
Copyright 2004, Hannspree California, Inc. All rights reserved.

Quick Start Guide

Source
Channel
Power
select
indicator LED
1. Connect one end of the VHF/UHF
(Antenna) or CATV cable to ANT Jack
(VHF/UHF IN Jack) on the back of the
TV.
2. Connect the other end of the VHF/UHF
(Antenna) or CATV cable to the Antenna
or CATV socket.
2. The cables are
color-coded (black,
VCR
red, white, and yellow).
Connect each color-
VCD
coded cable to
the appropriate
DVD
DC 12V 4-IN-1 HEADPHONE ANT
connector on your
device.
B R W Y
4-IN-1 HEADPHONE ANT
S-Video
connector
AV connectors
1. Connect the power cord to the power
adapter as illustrated.
2. Plug the power adapter connector into
the DC-IN input jack on the rear panel
of the TV.
3. Insert the three-pronged plug at the
other end of the power cord into a
power outlet.
Note :
Images are for illustration only and may
vary according to the model and region.
Other Models
The information in this Quick Start Guide applies to all models shown below.
Rear View Rear View
Speaker
Note: Do not unzip the plush cover. The plush
cover may only be removed by the qualified
personnel to service the product.
A/V and Channel Setup
Watching Broadcast or Cable TV
1. After you have made the appropriate power and source
connections, press the power button to turn on your television.
2. Press the SOURCE button to select TV.
3. Press the MENU button on the
control panel to enter the OSD menu.
4. Press the CH
5. Press the MENU button.
6. Press the CH
Selecting A/V Sources
1. Make sure your TV is turned on and a
device such as a DVD player is connected.
2. Press the SOURCE button on the
control panel to select different source signals.
TV/CATV channel number, AV or S-Video
appear on the screen.
Auto Channel Setup
1. Press the MENU button to enter the OSD menu.
2. Use the channel buttons on the control panel to select the "TV Setting" menu.
3. Press menu again until the "Auto Program" feature is selected.
4. Press
CH
MENU
5. Press the
6. Your television will begin automatically memorizing the available channels.
DC 12V 4-IN-1 HEADPHONE ANT
DC 12V 4-IN-1 HEADPHONE
4-IN-1 Antenna/Cable TV
DC 12V Headphone jack
button to select the TV setting.
or CH
button to select TV/CATV.
to select yes.
button.

Auto Program

TV Setting
AUTO MENU
Channel
SET SET
+-
AUTO Program
YES NO
ENTER
ANT
CH
menu SOURCE
VOL VOL
CH
TV
AV
S-Video
CH
menu SOURCE
VOL VOL
CH
MAD-001093