Table of Contents
Advertisement
Explanation of WARNING Symbols
Dangerous Voltage: The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the presence dangerous
voltage within the inside of the product that may be sufficient level to
constitute a risk of electric shock to persons.
Instruction: The exclamation point within an equilateral triangle is intended to
alert the user to the presence of important operating and servicing
instructions in the literature accompanying the appliance.
Safety instructions
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this LCD TV near water.
6) Clean only with dry cloth. Do not use liquid, alcohol, or aerosol cleaners.
7) Do not block any ventilation openings. Install your LCD TV in a well ventilated area.
8) Keep your LCD TV away from moisture, excessive dust and any heat sources,
such as radiators, heat registers, stoves, or any other apparatus (including
amplifiers) that produce heat.
9) Do not remove the back cover. There are no user-serviceable parts inside.
10) Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The third prong is provided for your
safety. If the provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
11) Protect the power cord from being walked on or pinched particularly at plugs,
receptacles, and the point where they exit from the LCD TV.
12) Never rest objects on the power cord or place it in high traffic
areas.
13) Only use attachments/accessories specified by the
manufacturer.
14) Use only with stand, tripod, bracket, or table specified by the
manufacturer, or sold with the LCD TV. When a cart is used,
use caution to avoid injury from tip-over.
15) Unplug this LCD TV during lightening storms or when unused
for long periods of time.
16) Refer all servicing to qualified service personnel-- Servicing may be required if the
LCD TV has been damaged in any way, such as power-supply cord or plug
damage, liquid has been spilled or objects have fallen into the LCD TV, the LCD TV
has been exposed to rain or moisture, does not operate normally, or has been
dropped.
1
Advertisement
Table of Contents
Related Manuals for HANNspree XV-S Series
Summary of Contents for HANNspree XV-S Series
- Page 1 Explanation of WARNING Symbols Dangerous Voltage: The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence dangerous voltage within the inside of the product that may be sufficient level to constitute a risk of electric shock to persons. Instruction: The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and servicing instructions in the literature accompanying the appliance.
- Page 2 17) Do not expose your LCD TV to dripping or splashing, and do not place objects filled with liquids on it. 18) The Shock Hazard Marking and Associated Graphical Symbol are provided on the back panel of unit. 19) This product is only to perform the useful function of entertainment and visual display tasks are excluded.
- Page 3 disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges. Do not disconnect the antenna or the power cord during a heavy storm lighting may strike while you are holding the cable cord, causing serious injury;...
-
Page 4: Table Of Contents
Content ACCESSORIES......................... 1 FRONT PANEL BUTTONS ....................2 INTERFACE........................3 REMOTE CONTROL ......................4 INSTALLATION........................8 Connecting RF antenna or Cable TV Wire ..............8 Connecting to External Stereo System to Listen to LCD TV Sound......8 Connecting to DVD/ Set Top Box................8 Connecting to a computer.................. -
Page 5: Accessories
ACCESSORIES Thank you for purchasing this LCD-TV. This LCD-TV package comes with: LCD TV User’s Manual Quick Start Guide Warranty Card Remote control Battery AA x 2 Power Cord PC Audio Cable VGA Cable SCART to RCA Adapter... -
Page 6: Front Panel Buttons
FRONT PANEL BUTTONS Volume - Down Volume + Up On Screen Display Menu On/Off Channel Down (Scroll Down) Channel Up (Scroll Up) Enter Power ON/OFF Power LED Indicator ❾ Remote Control Receiver... -
Page 7: Interface
INTERFACE E F G H I J K L AC Power Switch (Must be turned on) Power Input (AC Input) HDMI Input Terminal (19 pin) D-SUB (15 pin) Signal Input from Computer Audio Input for VGA Headphone Jack YPbPr / HD Component Video Input Composite Video input Audio Input for YPbPr/ HD components (left/ right) Audio Input for AV or S-Video Components (left/ right) -
Page 8: Remote Control
REMOTE CONTROL... - Page 9 Remote control button function as follows： POWER Power ON/OFF Power LED Indicator MUTE Volume mute ON/OFF SOURCE Input source select (for main screen) INFO Display the current information POP ON/OFF PIP ON/OFF P. SOURCE Input source select (for PIP/POP sub-screen) P.
- Page 10 Teletext function control button TEXT/ MIX/ PICTURE button In TV Mode: Press the TEXT/ MIX/ PICTURE button to enter the Teletext mode. In TELETEXT Mode: Press the button again to superimpose a Teletext Broadcast onto the screen of current TV program (mixed Mode). In MIXED Mode: Press the button again to return back to the normal TV Screen (current program).
- Page 11 To continue press this button again. The number of sub pages and the sub page displayed is, usually, shown on the screen below the time. When this button is pressed the stop symbol is displayed at the left-top corner of the screen and the automatic changing is inhibited. SIZE button Select double height text under Teletext mode for full screen.
-
Page 12: Installation
INSTALLATION Connecting RF antenna or Cable TV Wire Make sure the power is OFF before installing your LCD TV. Connect the LCD TV to TV antenna wire or cable/satellite box with 75-ohm coaxial cable. Preset the TV channels into memory with AUTO SCAN function when using an antenna or cable TV system without a cable connecter box. - Page 13 2) With S-Video cable: S-Video Cable (Not included) Audio in Cable (Not included) VCR or DVD Player 3) With YPbPr cable: YPbPr Cable (not included) Audio in Cable (Not included) VCR or DVD Player 4) With SCART1: SCART Cable (Not included) VCR or DVD Player 5) With SCART2/ SCART2-SV: SCART Cable (Not included)
-
Page 14: Connecting To A Computer
6) With HDMI cable: (DVD Player should have the HDMI Output terminal) VCR or DVD Player HDMI Cable (Not included) Connecting to a computer Connect the VGA cable from VGA output of computer to the VGA terminal input of your LCD TV. -
Page 15: Pc Audio In/ Dvi Change To Hdmi
PC Audio In/ DVI change to HDMI Connect the Audio In cable (green) from audio output of your computer to the audio input terminal (green) of the LCD TV. PC Audio Out Connection Connecting to a Computer with HDMI-DVI cable Connect the HDMI-DVI cable from DVI output of computer to the HDMI terminal input of the LCD TV. -
Page 16: Basic Operation
BASIC OPERATION To operate your LCD TV, you may use the TV remote control or upper panel buttons to select input source, change channels, or adjust volume. Turning on the LCD TV Before using the LCD TV: 1. Insert the power cord. 2. -
Page 17: Sound
PIP Screen : POP Screen： PIP/POP Input Source Select 1. Press P. SOURCE to select input source for sub-screen as following, Main Screen Input Source of Sub-Screen TV/ AV/ SV/ SCART1/ SCART2/ SCART2-SV D-SUB/ HDMI/ HD D-SUB/ HDMI/ HD TV/ AV/ SV/ SCART1/ SCART2/ SCART2-SV 2. -
Page 18: Video
Program’s sound setting Exchangeable sound output dual dual I, dual II stereo stereo, mono mono mono Video Picture Mode Select Continue to press SMART.P key to select picture mode between Move, Vivid, User, and Standard. Aspect Ratio Select Continue to press ASPECT key to select image size between Zoom1, Zoom2, Normal, Panorama, and Full. -
Page 19: Advanced Operation-Osd Menu/ Remote Control
ADVANCED OPERATION—OSD MENU/ REMOTE CONTROL Picture Menu — Adjusting the picture It is active in TV/ AV/ SV/ HD/ SCART1/ SCART2/ SCART2-SV/ HDMI (support HDCP mode) source. Contrast: To adjust contrast of video. Brightness: To adjust luminance of video. Colour: To adjust colour. Tint: To adjust tint level. -
Page 20: Channel Menu
Treble: To adjust the treble (It is active in TV/ SCART1/ SCART2/ SCART2-SV. However, in other input sources, it is only active when sound mode is in “User” condition). Balance: To adjust left and right audio balance. Reset: Press ENTER to reset all the settings in Sound page. - Page 21 Name: To enter a name for program with 0~9, +-. /, and A~Z. Press ◄ or ► to get into “Name.” 1. To enter a name: Press red key (on the remote control) to move your cursor to “Name.” Use ▲▼ to select the desired letter and use◄► to move the cursor to enter next letter. To confirm the name, press blue key.
-
Page 22: Option Menu
Option Menu When input source is TV/ AV/ SV/ HD/ When input source is D-SUB/ HDMI(PC): SCART1/ SCART2/ SCART2-SV/ HDMI(HDCP): Main Source: To select the input source for main screen between TV, AV, SV, HD, SCART1, SCART2, SCART2-SV, D-SUB, and HDMI with ◄►. H-Position: To adjust the horizontal position of the video with ◄►. -
Page 23: Osd Menu
Colour Mode: To adjust colour temperature. 1. Press ◄ or ► to get into Colour Mode. 2. Use ◄►to select between Cool, sRGB, User, Normal, and Warm. 3. When select “User,” it allows you separately adjust the colour of red, green, and blue. Reset: Press ENTER to reset all the settings in PC page. -
Page 24: Technical Specification
TECHNICAL SPECIFICATION Type 37.0” TFT Active Matrix 0.6(H) x 0.6(V) mm pixel pitch Color Filter RGB vertical stripe Glass surface Anti-Glare Input signal RGB analog (0.7/1.0 Vp-p, 75 ohms) Separate Sync, fh: 30-80 kHz, fv:50-75 Hz TV system Antenna / PAL Video 1 composite RCA, 1 S-Video, 1 YPbPr component, 1 HDMI, 2 SCART... -
Page 25: Safety Precautions
SAFETY PRECAUTIONS This LCD TV is manufactured and tested to insure the user’s safety. Improper use or installation may result danger to the LCD TV as well as to the user. Carefully go over the following WARNINGS before installation and keep this guide handy. WARNINGS This LCD TV should be operated only at the correct power sources indicated on the label on the rear end of the LCD TV. -
Page 26: Care And Maintenance
CARE AND MAINTENANCE Care Avoid exposing your LCD TV directly to sunlight or other heat source. Place your LCD TV away from the sun to reduce glare. Put your LCD TV in a well ventilated area. Do not place anything heavy on top of your LCD Make certain your LCD TV is installed in a clean and moisture-free area.