DISHWASHER FEATURES
Your dishwasher cleans by spraying a mixture of hot water and detergent through the spray arms against soiled surfaces.
Next, the dishwasher fills with water covering the filter area. Water is then pumped through the spray arms onto the
dishware. Soil particles go down the drain as the water is pumped out and replaced with clean water. The number of
water fills will vary with the cycle being used. Features may vary by Model.
Cup Shelves
Bowl Tines
Middle Spray Arm
Glass Trap
Overfill Protector
Detergent Dispenser
Vent
Getting Started
1. Load dishwasher
2. Add detergent
3. Add rinse aid
4. Select desired CYCLE. The indicator light above the
pad will glow when selected.
5. Select desired OPTIONS. The indicator light above
the pad will glow when selected.
6. Run hot water faucet nearest dishwasher until water
is hot. Turn water off.
7. To start, press START/CANCEL pad.
8. Close door to latch.
4
Nozzle and Upper Spray Arm
Top Rack
NOTE
To customize your dishwasher to match your cabinets
•
You will need a trim kit.
•
See Step 10 of Installation Instructions that came with
dishwasher for more information.
Tub Gasket
Serial Label
(located on right
side of tub)
Silverware
Basket
Bottom Rack
Blade Spray
TM
Heating Element
Rinse Aid
Dispenser