Shooting An Image In Accordance With Subject Movement - Casio EXILIM EX - Digital Camera - 3.2 Megapixel User Manual

Shooting an Image in Accordance with Subject Movement

(Move Out CS/Move In CS)
You can use these features to shoot an image automatically whenever the subject
moves into or moves out of a frame on the monitor screen. You also can configure the
camera to record images of what happened immediately before and after the subject
moves.
Move Out CS
Move In CS
. To setup the camera
1.
In the REC mode, set the mode dial to b.
2.
Press [SET] and then select "Move Out CS" or "Move In CS".
3.
Use [8] and [2] to select the fourth control panel option from the
bottom (æ Trigger Area Boudary), and then press [SET].
4.
Configure the boundary location and size
settings.
[8] [2] [4] [6] Moves the boundary.
Control Dial
5.
Press [SET].
6.
Use [8] and [2] to select the third control panel option from the
bottom (Trigger Sense).
7.
Use [4] and [6] to select the subject movement sensitivity, and then
press [SET].
• You can select any one of three sensitivity levels: "High", "Normal", or "Low".
• Move Out CS Setting Guide
High: For a subject that moves out of the boundary quickly
Low : For a subject that moves out of the boundary slowly
• Move In CS Setting Guide
High: For a subject that moves into the boundary quickly or for a small subject
(relative to the boundary)
Low : For a subject that moves into the boundary slowly or for a large subject
(relative to the boundary)
Automatically records what happened immediately before and
after the subject moves outside of a boundary on the monitor
screen.
Automatically records what happened immediately before and
after the subject moves into a boundary on the monitor screen.
Resizes the boundary.
72
Boundary
Using BEST SHOT