Table of Contents
Advertisement
• The initial factory default image size setting is 6M (6 million pixels).
• Selecting 3:2 (2816
matches the standard aspect ratio of print paper.
• The letters "HDTV" stand for "High Definition Television". An HDTV screen has an
aspect ratio of 16:9, which makes them wider than the usual 4:3 aspect ratio of
television screens of the past. Your camera can record images that are compatible
with the aspect ratio an HDTV screen.
• You should regard the print paper sizes suggested here as guidelines only (200 dpi
print resolution).
• You can shoot directly to RAW image data only while the t (Single Shot) is
selected with the CS dial and "RAW+" is selected as the image size. Consecutive
mode and BEST SHOT mode shooting produces "6M" image size JPEG images
only, which is selected automatically.
Using Flash (Flash)
1.
In the REC mode, press [2] (
once.
2.
Use [4] and [6] to select the flash
setting you want and then press
[SET].
Auto Flash
>
Flash Off
?
Flash On
<
Red Eye
¥
Reduction
External
¢
Flash
1872 pixels) records images with an aspect ratio of 3:2, which
x
Flash fires automatically in accordance with exposure
(amount of light and brightness) conditions.
Flash does not fire.
Flash always fires. This setting can be used to brighten a
subject that normally comes out dark due to daylight or
backlight (daylight synchro flash).
Flash fires automatically. This type of flash can be used to
reduce the chance of redness in the subject's eyes.
Fires a commercially available external flash unit. Flash
always fires.
• See page 92 for more information about using an external
flash.
)
[2] (
31
Flash
)
Snapshot Tutorial
Advertisement
Table of Contents
