Setting The Aeb - HP s300 User Manual

To set the Drive Mode
1. From the Record menu, select
2. Use the or keys to go through the selection.
3. Press the
OK button
The table below shows the available Drive mode settings.
Icon Item
Off
10 Sec.
2 Sec.
Double
Burst
Speedy Burst

Setting the AEB

AEB stands for Automatic Exposure Bracketing. It takes 3 consecutive photos in the order of standard exposure,
under exposure and overexposure compensation.
To set AEB
1. From the Record menu, select
2. Use the or keys to go through the selection.
3. Press the OK button
Drive Mode.
to save and apply changes.
Description
Captures an image without time delay.
Sets a 10-second delay to capture image after pressing the Shutter button.
Sets a 2-second delay to capture image after pressing the Shutter button.
Performs delay and capture twice:
• Performs a 10-second delay, then captures the image.
• Performs another 2-second delay then captures the image again.
Performs continuous shooting when the Shutter button is pressed.
Stops shooting when the shutter button is released.
Captures 30 images in a shot when the Shutter button is pressed.
Auto set Image size to VGA only.
AEB.
to save and apply changes.
44