Disclaimer; Power Safety - BenQ VW2220 User Manual

Copyright
Copyright © 2011 by BenQ Corporation. All rights reserved. No part of this publication may be
reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or
computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical,
manual or otherwise, without the prior written permission of BenQ Corporation.

Disclaimer

BenQ Corporation makes no representations or warranties, either expressed or implied, with respect
to the contents hereof and specifically disclaims any warranties, merchantability or fitness for any
particular purpose. Further, BenQ Corporation reserves the right to revise this publication and to
make changes from time to time in the contents hereof without obligation of BenQ Corporation to
notify any person of such revision or changes.
Please follow these safety instructions for best performance,
and long life for your monitor

Power Safety

• The AC plug isolates this equipment from the AC supply.
• The power supply cord serves as a power disconnect device for pluggable equipment. The socket
outlet should be installed near the equipment and be easily accessible.
• This product should be operated from the type of power indicated on the marked label. If you are
not sure of the type of power available, consult your dealer or local power company.
• A certified power supply cord has to be used with this equipment. The relevant national
installation and/or equipment regulations shall be considered. A certified power supply cord not
lighter than ordinary polyvinyl chloride flexible cord according to IEC 60227 (designation
H05VV-F 3G 0.75mm
of synthetic rubber according to IEC 60245 (designation H05RR-F 3G 0.75mm
the equivalent.
• For V2320/V2320H, the power adapter is manufactured by TPV (ADPC1236).
For other models, the power adapter is manufactured by FSP Group Inc. (FSP036-RAC) and
Darfon Electronics Corp. (BB02-B).
• Use only the power adapter supplied with your LCD Monitor. Use of another type of power
adapter will result in malfunction and/or danger.
• Allow adequate ventilation around the adapter when using it to operate the device or charge the
battery. Do not cover the power adapter with paper or other objects that will reduce cooling. Do
not use the power adapter while it is inside a carrying case.
• Connect the power adapter to a proper power source.
• Do not attempt to service the power adapter. There are no service parts inside. Replace the unit if
it is damaged or exposed to excess moisture.
ii
2
or H05VVH2-F2 3G 0.75mm
2
) shall be used. Alternative a flexible cord be
2
) shall be used." or