Section - Installation
This section will walk you through the installation process. If you have a built-in wireless adapter, please disable it in device manager
before installing your D-Link adapter. Also, if you have previously installed another wireless adapter, please make sure any software
is uninstalled.
Before installing your new D-Link wireless adapter, please verify the following:
• Remove any previous installations of wireless adapters
• Disable any built-in wireless adapters
• Verify the settings such as the SSID and security settings of the network(s) you want to connect to
If you've installed a different manufacture's adapter or a different model D-Link adapter, make sure the software is uninstalled before
installing the new software. Some utilities may cause a conflict with the new software. If you plan to use multiple adapters at different
times, make sure the utilities are not set to load when your computer boots up. Windows
utility for all adapters.
To remove any old software:
Windows
XP users: Click Start > Control Panel > Add or Remove Programs.
®
Windows
000 users: Click Start > Settings > Control Panel > Add or Remove Programs.
®
D-Link WNA-1330 User Manual
Installation
Getting Started
Remove Existing Installations
XP users may use the built-in wireless
®
8