Connecting The External Media Bay - Dell Latitude LS System Information Manual
Hide thumbs
Also See for Latitude LS:
- User manual (178 pages) ,
- System information manual (108 pages) ,
- Service manual (49 pages)
Table of Contents
Advertisement
2-4
Dell Latitude LS Portable Computers System Information
AC adapter
power cable
AC adapter cable
Figure 2-1. Connecting the AC Adapter
2.
Plug the AC adapter power cable into the AC adapter.
3.
Plug the AC adapter power cable into an electrical outlet.
Connecting the External Media Bay
(Optional)
To connect a device in the external media bay (see Figure 2-2) to the computer, per-
form the following steps.
NOTE: To avoid overheating the computer, do not place the external media bay close
to the air inlet or fan intake/exhaust vents.
1.
To install a device in the media bay, slide the device into the bay until you hear the
click that indicates that the device is fully seated.
2.
Connect the larger of the media bay cable's two connectors to the device through
the slot in the back of the bay.
Make sure that the securing clips are fully engaged and the connector is fully
seated.
3.
Connect the other end of the cable to the media bay connector on the computer.
NOTE: You can use the media bay cable in the same manner to connect a stand-alone
device to the computer.
AC adapter
AC adapter connector
Advertisement
Table of Contents
