Maintaining; Cleaning The Tv Cabinet; Cleaning The Tv Screen; Troubleshooting - Insignia NS-46E480A13A User Manual

Insignia 46"/55" 1080p LED TV
5 Press or to highlight Settings, then press
ENTER. The Photos · Photos · Settings menu
opens.
Photos • Photos • Settings
Repeat
Shuffle
Speed
Transition
OK
MOVE
ENTER
Repeat the slideshow when it reaches the end.
6 Press or to highlight an option, then press
ENTER. You can select:
• Repeat—Repeats the slideshow when it
reaches the end. You can select On or Off.
• Shuffle—Displays the slideshow photos in
random order. You can select On or Off.
• Speed—Sets the amount of time a photo is
displayed before the slideshow moves to the
next photo. You can select 4 Sec, 6 Sec, or
8 Sec.
• Transition—Selects the way photos transition
when moving to the next file in the slideshow.
You can select:
• None—No transition effect.
• Fade to Black—Fades the screen to black
between photos.
• Vertical Wipe—Wipes the screen from top
to bottom between photos.
• Horizontal Wipe—Wipes the screen from
left to right between photos.
• Random—Randomly selects a transition
effect.
7 Press EXIT to close the menu.

Maintaining

• Do not use your TV in areas that are too hot or too
cold, because the cabinet may warp or the screen
may malfunction. Your TV works best in
temperatures that are comfortable to you.
• Storage temperatures are 32° to 122°F (0° to 50°C).
• Working temperatures are 41° to 104°F
(5° to 40°C).
• Do not place your TV in direct sunlight or near a
heat source.

Cleaning the TV cabinet

Clean the cabinet with a soft, lint-free cloth. If the
cabinet is especially dirty, moisten a soft, lint-free
cloth in a weak detergent solution, squeeze the
excess moisture from the cloth, then wipe the
cabinet with the cloth. Use a clean cloth to dry the
cabinet.

Cleaning the TV screen

Clean the screen with a soft, lint-free cloth.
PICTURE AUDIO CHANNELS SETTINGS PHOTOS
On
Off
4 sec
None
SELECT PREVIOUS EXIT
MENU EXIT
www.insigniaproducts.com

Troubleshooting

Warning
Do not try to repair your TV yourself. Contact
MHL/ACC authorized service personnel.

Video and audio

Problem
Picture does not fill the
screen. There are black bars
around the picture.
No picture (screen is not lit)
and no sound.
Dark, poor, or no picture
(screen is lit), but sound is
good.
Solution
• Change the aspect ratio. An increasing amount
of digital TV and movies are presented in wide
screen (16:9). See "Aspect ratio
page 26.
• Press on the TV or the remote control.
• Make sure that the Audio Only option is set to
Off. See "Playing TV audio only" on page 28.
• Make sure that the video cables are connected
securely to your TV.
• Adjust the contrast and brightness. See
"Adjusting the TV picture" on page 25.
• Make sure that the power cord is plugged in.
• Make sure that the correct video input source is
selected. See "Selecting the video input
on page 23.
• Try another channel. The station may be
experiencing problems.
• Make sure that the incoming signal is
compatible.
• Make sure that the antenna or cable TV is
connected correctly and securely. See
"Connecting a cable or satellite
or "Connecting an antenna or cable TV (no
on page 13.
• Check the closed caption settings. Some TEXT
modes can block the screen.
• Try another channel. The station may be
experiencing problems.
• Make sure that the antenna or cable TV is
connected correctly and securely. See
"Connecting a cable or satellite
or "Connecting an antenna or cable TV (no
on page 13.
• Adjust the brightness. See "Adjusting the TV
picture" on page 25.
• Make sure that the correct picture mode is
selected. See "Adjusting the TV
page 25.
• If you are using an antenna, the digital channel
signal may be low. To check the digital channel
signal strength, see "Checking the digital signal
strength" on page 31.
• If you are using an antenna and the signal
strength is low, adjust the antenna or use a
highly directional outdoor antenna or set-top
antenna with a built-in amplifier.
• Make sure that the video cables are connected
securely to your TV.
• The video cable(s) you are using may be bad. Try
a new set.
• Try another channel. The station may be
experiencing problems.
options" on
source"
box" on page 10
box)"
box" on page 10
box)"
picture" on
49