Insignia NS-46E480A13A User Manual page 26

11 Press or to highlight Antenna, Cable, or
Satellite Box, then press ENTER.
A If you select Antenna, your TV scans for
available channels. The scan may take
several minutes.
Scanning for Channels
MOVE OK
ENTER
Select if using an antenna for standard or HD TV.
Channel scan may take 20+ minutes.
During scanning, your TV searches for
digital channels first. When the digital
channel search is complete, a message
appears asking if you want to search for
analog channels. Select Yes to continue
searching for analog channels, or select No
to stop searching for channels.
Note
You can press EXIT to stop the auto channel search,
but you will need to run the auto channel search
again to create a channel list.
B If you select Cable, a message asks if you
have a cable box:
Do you have a Cable Box?
MOVE OK
ENTER
Yes
• Select No, then press ENTER if no cable
box is connected. Your TV scans for
available channels. The scan may take
several minutes.
22
0 Digital Channels
0 Analog Channels
SELECT PREVIOUS
MENU EXIT
No
Yes
SELECT PREVIOUS
MENU EXIT
www.insigniaproducts.com
NS-46E480A13A/NS-55E480A13A Insignia 46"/55" 1080p LED TV
• Select Yes, then press ENTER if a cable box
How did you connect the cable box to the TV?
EXIT
Note
You can press EXIT to stop the auto channel search,
but you will need to run the auto channel search
again to create a channel list.
C If you select Satellite Box, a message asks
How did you connect the satellite box to the TV?
EXIT
• Select AV, Component, or HDMI, then
• Select Coaxial, then press ENTER if you
Note
You can press EXIT to stop the auto channel search,
but you will need to run the auto channel search
again to create a channel list.
is connected. A message asks how you
connected the cable box to your TV.
AV, Component, or HDMI
Coaxial
MOVE OK SELECT PREVIOUS
MENU
ENTER
• Select AV, Component, or HDMI, then
press ENTER if you connected a cable
box to your TV using one of these
cables. Read the message, then press
ENTER to close the wizard.
• Select Coaxial, then press ENTER if you
connected a cable box to your TV using
a coaxial cable. Read the message, then
press ENTER to start the channel scan
(VHF channels only).
how you connected the satellite box to
your TV:
AV, Component, or HDMI
Coaxial
OK
MOVE SELECT PREVIOUS
MENU
ENTER
press ENTER if you connected a satellite
box to your TV using one of these cables.
Read the message, then press ENTER to
close the wizard.
connected a satellite box to your TV using
a coaxial cable. Read the message, then
press ENTER to start the channel scan (VHF
channels only).
EXIT
EXIT
EXIT
EXIT