D-Link DWL-610 Manual page 42

Troubleshooting (continued)
n
Check that the Network Connection for the wireless client is configured
properly. Select AP (Infrastructure) when connecting to an access point
and select Ad-Hoc mode when connecting without an access point. Double-
click on the WLAN icon in the taskbar > click on Configuration to change
the settings for the wireless adapter.
n
If Security is enabled, make sure that the correct encryption keys are
entered on both the DWL-610 and the access point. Double-click on the
WLAN icon in the taskbar > click Encryption. Check to see that the key
selected is set to the same key as other devices on the network.
7. How can I troubleshoot distance issues using the DWL-610.
n
Move the DWL-610 and Access Point or Wireless router into the same
room and then test the wireless connection.
n
Change the channel of the Access Point.
n
Move devices within the line of sight
42