The Setup Tab - Mac Address Clone; Figure 5-16: Setup Tab - Mac Address Clone - Linksys WRT54GR User Manual

Wireless-G Broadband Router with RangeBooster

The Setup Tab - MAC Address Clone

A MAC address is a 12-digit code assigned to a unique piece of hardware for identification. Some ISPs will
require you to register a MAC address in order to access the Internet. If you do not wish to re-register the MAC
address with your ISP, you may assign the MAC address you have currently registered with your ISP to the Router
with the MAC Address Clone feature.
Enable/Disable. To have the MAC Address cloned, click the radio button beside Enable.
MAC Address. Enter the MAC Address registered with your ISP here.
Clone My PC's MAC. Clicking this button will clone the MAC address.
Change these settings as described here and click the Save Settings button to apply your changes or Cancel

Figure 5-16: Setup Tab - MAC Address Clone

Changes to cancel your changes.
Chapter 6: Configuring the Wireless-G Broadband Router with RangeBooster 16
The Setup Tab - MAC Address Clone