Figure 8-10: Optional Settings; Figure 8-11: Router Ip - Linksys WRT54G3G-VN User Manual

Wireless-g router for 3g/umts broadband
Hide thumbs Also See for WRT54G3G-VN:
Table of Contents

Advertisement

Wireless-G Router for 3G/UMTS Broadband
soon as you attempt to access the Internet again. If you wish to activate Connect on Demand, click the radio
button. In the Max Idle Time field, enter the number of minutes you want to have elapsed before your Internet
connection terminates.
Keep Alive Option: Redial Period. If you select this option, the Router will periodically check your Internet
connection. If you are disconnected, then the Router will automatically re-establish your connection. To use
this option, click the radio button next to Keep Alive. In the Redial Period field, you specify how often you want
the Router to check the Internet connection. The default Redial Period is 30 seconds.
Optional Settings
Some of these settings may be required by your ISP. Verify with your ISP before making any changes.
Router Name. In this field, you can type a name of up to 39 characters to represent the Router.
Host Name and Domain Name. These fields allow you to supply a host and domain name for the Router. Some
ISPs, usually cable ISPs, require these names as identification. You may have to check with your ISP to see if your
broadband Internet service has been configured with a host and domain name. In most cases, leaving these
fields blank will work.
MTU. MTU is the Maximum Transmission Unit. It specifies the largest packet size permitted for Internet
transmission. The default setting, Manual, allows you to enter the largest packet size that will be transmitted.
The recommended size, entered in the Size field, is 1492. You should leave this value in the 1200 to 1500 range.
To have the Router select the best MTU for your Internet connection, select Auto.
Network Setup
The Network Setup section changes the settings on the network connected to the Router's Ethernet ports.
Wireless setup is performed through the Wireless tab.
Router IP
This displays both the Router's IP Address and Subnet Mask as seen by your network.
Chapter 8: Configuring the Wireless-G Router for 3G/UMTS Broadband
The Setup Tab - Basic Setup

Figure 8-10: Optional Settings

Figure 8-11: Router IP

59

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wrt54g3g

Table of Contents